KUBE ENGINEERING.COM

                                        Phone: 951-926-0675

SALES i ENGINEERING i SERVICE

kube_engineering_home
Kube_applications
kube_engineering_about
Kube_engineering_contacts

Toshiba Electromagnetic Meters

Click of Principal's website

TOSHIBA INTERNATIONAL CORPORATION

Toshiba International Corporation (TIC) is a Toshiba America Inc. Group Company, a wholly owned subsidiary of Toshiba Corporation. TIC is headquartered in Houston, Texas and employs approximately 1,200 people. TIC provides application solutions to a wide range of industries including industrial, power systems, transmission and distribution systems, and lighting systems

A unique magmeter company which provides solutions to difficult applications.  They have Microwave Analyzers in a flow tube form. Their meters can be mounted anywhere with a zero approach. Capacitive flow meters for the purewater and pharmacological applications, partially filled pipes and some of the world's largest flow tube sizes. Toshiba is more than your regular mag meters, they solve problems.

PLEASE SEE www.kubedist.com for the Premium Value "G" Series Mags.

 

Toshiba_Densometer_and_Flowmeter

 

Toshiba_Microwave_Analyzer_Flanged

LQ500

Microwave Analyzer

The Toshiba LQ500 Microwave Analyzer measurement technique is based on the way solids affect the propagation of microwaves compared to all other ingredients in the pipe, and thus, the unit is solely specific to the percent solids in the pipe.

The LQ500 has a linear output and is optimized to measure true percent total solids in your process fluid. Accordingly, a very repeatable measurement) and excellent closed loop control is easily implemented.

Primary use for the microwave analyzer is to increase plant efficiency, improve product quality and reduce labor and laboratory cost. It is also used for replacing high maintenance or poor performing meters such as optical, ultrasonic, nuclear, blades, coriolis, etc.
 Toshiba_Microwave_Density_Analyzer_BrochureMicrowave Density Analyzer Brochure

Toshiba_LQ500_IMLQ500 Instruction Manual

LQ500_Data_SheetLQ500 Data Sheet

 

 

LQ510

Sanitary Microwave Analyzer

The LQ510 Microwave Analyzer is the sanitary version of the LQ500 and utilizes the same operational principles. The LQ510 is a 3A approved device for use in sanitary applications such as food and pharmaceutical. All wetted parts are constructed with 316 Stainless Steel. The unit is designed to meet CIP and SIP requirements, depending upon the conditions, and is also available to meet HACCP system requirements. Process connections are made via ISO2852 clamp (IDF clamp) or Tri-Clamp® connections.

Microwave technology has no pressure drop in the line, no vibration of the product, no fouling or depleting sensors, no nuclear issues, and has very low maintenance.

The LQ500 has a linear output and is optimized to measure true percent total solids in your process fluid. Accordingly, a very repeatable measurement) and excellent closed loop control is easily implemented.
 

Microwave Density Analyzer Brochure

Toshiba_LQ510_IMLQ510 Instruction Manual

Toshiba_LQ510_IMLQ510 Data Sheet

 

 

LF654 Flanged Mount Anywhere

Do you have junctions, tees, valves, probes, flanges, elbows, lack of space for straight piping runs or vertical down flow piping? This is no problem for the Mount-Anywhere Magnetic Flowmeter!
 
Toshiba's Mount-Anywhere Magmeter has saved thousands of customers thousands of dollars in installation cost by reducing or eliminating the cost of wiring, fence, labor, pipe, conduit and space. The Mount-Anywhere characterized coil technology allows flow measurement to better than 0.5% of rate accuracy only one diameter from the flange of an elbow, valve in line sizes up to 18".

The Mount-Anywhere Magmeter is the world’s first and only true-flow, profile-immune magmeter. There is no need to re-pipe the process or to design long straight runs ahead of time to ensure the magmeter will meet its published accuracy specification. The Mount-Anywhere Magmeter is ideal for use as a universal magmeter with its ability to be installed virtually anywhere in the plant. This model is the successor of LF434/LF620, LF434/LF622.
 Toshiba_LF654_LF620_Data_sheetLF654/LF620 Data Sheet

Toshiba_LF654_IMLF654 Flowmeter Instruction Manual

Toshiba_LF620_LF622_IMLF620/LF622 Instruction Manual

Toshiba_LF620_LF622_Operation_GuideLF620/622 Operation Guide

 

 

 

    

LF414

Wafer Flow Meter

Mount-Anywhere™ Gap and Crevice Free Wafer Style Magmeter is an excellent choice for high slurry concentrations, abrasive, adhesive, or corrosive applications. Toshiba’s exclusive Float-N-Place™ ceramic liner has been specially designed to operate in severe slurry applications where a continuous slurry exposure could damage non-floating ceramic liners. Toshiba’s ceramic liner is specially mounted "inside" the flow tube and does not protrude to the outside of the body like conventional ceramic magmeters. This exclusive design virtually eliminates the possibility of breakage due to accidental bumping of the meter, rapid temperature changes, or over tightening of flanges. Compare Toshiba’s Float-N-Place™ thermal shock specifications of 302°F change in just 0.5 seconds to others that have stationary locked-in-place ceramic liners. Toshiba_LF414_LF620_Data_sheetLF414/LF620 Data Sheet

Toshiba_LF414_IMLF414 Flowmeter Instruction Manual

Toshiba_LF620_LF622_IMLF620/LF622 Instruction Manual

Toshiba_LF620_LF622_Operation_guideLF620/LF622 Operation Guide

 

LF502

Partially Filled Magmeter

The LF502 is a magmeter for partially-filled pipes. This magmeter has an improved functional magnetic field distribution technique enabling a high-precision flow measurement from low-level to fully-filled flow conditions. In addition to these characteristics, the LF502 does not allow mud, sands, and other solid sediment to stay at the bottom of the detector pipe and is unaffected by wave or floating solids on the fluid surface.Sizes: From 6 inch to 24 inchToshiba_LF502_IMLF502 Flow Meter Instruction Manual

Toshiba_LF232_IMLF232 Converter Instruction Manual

Toshiba_LF502_Data_SheetLF502 Datasheet

LF494

Sanitary Flow Meter

 

Mount Anywhere™ Sanitary

Gap-Free™ LF494

Unique One-Piece Sanitary Magmeter Design
Most conventional sanitary magmeters are made from three or more pieces before it connects to your process piping. The more parts to a magnetic flow meter detector the greater the chance for bacteria to hide and grow. Toshiba's Gap-Free™ sanitary magmeter is designed as a single body piece eliminating the possibility of liquids solidifying in cracks or gaps in the unit. With the exception of electrodes from the input flow process connector to the outlet flow connector, there is only the Gap-Free™ detector body. The totally gap-free design eliminates gaps, cracks, crevices, flanges, screws, gaskets, matching body adapters and any other part that would allow bacteria to collect. The unibody design not only prevents trapping of particles but also provides for fast and easy cleaning on both the inside and outside of the meter.

Toshiba's Gap-Free™ Magmeter is also available in a sanitary capacitance electrodeless model for the ultimate in total-gap and crevice-free design.
 
 Toshiba_LF494_LF622_Data_SheetLF494/LF620 Data Sheet

Toshiba_LF494_IMLF494 Flow meter Instruction Manual

Toshiba_LF620_LF622_IMLF620/LF622 Converter Instruction Manual

Toshiba_LF620_LF622_Operation_guideLF620/LF622 Operation Guide

 

 

LF516

Capacitance Sanitary Ceramic Flow  meter

Capacitance Sanitary

Electrodeless - Ceramic

Gap-Free™
LF516 Ultra Low Conductivity

LF516 Gap-Free™ Sanitary Capacitance Electrodeless Ceramic
The LF516 flowmeter has exclusive 0.01 µS/cm ultra low conductivity specification on flows up to 9.84 ft/s for normal or ultra low conductivity service.

The LF516 is a gap and crevice free capacitance sanitary magmeter. It is an excellent choice for ultra low conductivity, high slurry concentrations, abrasive, adhesive, or corrosive applications. Toshiba’s exclusive Float-N-Place™ ceramic liner has been specially designed to operate in severe slurry applications where a continuous slurry exposure could damage non-floating ceramic liners. Toshiba’s ceramic liner is specially mounted "inside" the flow tube and does not protrude to the outside of the body like conventional ceramic magmeters. This exclusive design virtually eliminates any possibility of breakage due to accidental bumping of the meter or rapid temperature changes during CIP or SIP conditions. Compare Toshiba’s Float-N-Place™ thermal shock specifications of 302 °F change in just 0.5 seconds to other stationary locked-in-place liners.
 

 

 

Toshiba_LF516_LF546_Sanitary_Data_sheetLF516/LF546 Data Sheet

Toshiba_LF516_LF546_Sanitary_Instruction_ManualLF516/LF546 Instruction Manual

 

  

LF510 and

LF514

Severe Service

Capacitance Severe Service

Electrodeless - Ceramic

Gap-Free
Ultra Low Conductivity

LF516 Severe Service Magmeter
Gap-Free
, Capacitance, Ultra Low Conductivity, Electrodeless with Ceramic Liner
The LF516 Servere Service Magmeter is unquestionably one of the toughest and best performing industrial magmeters in the world today. Its extraordinary tough performance specifications make it the prefect choice for the really harsh and nasty industrial applications. Its exclusive electrodeless Float-N-Place™ alumina ceramic liner gives it the highest abrasion, corrosion, adhesion, and thermal shock performance specifications on the market.

Looking for the lowest conductivity magmeter specifications on the market? The LF516 has an ultra low conductivity specification of 0.01µS/cm on flows up to 9.84 ft/s allowing it to work in applications where other low conductivity meters would fail.

Toshiba’s ceramic liner is specially mounted "inside" the flow tube (Float-N-Place™) and does not protrude to the outside of the body like conventional ceramic magmeters. This exclusive float-inside-the-body design virtually eliminates any possibility of breakage due to accidental bumping of the meter or rapid temperature changes since the ceramic liner is not constrained by flanges. Compare Toshiba’s Float-N-Place™ thermal shock specifications of 302 °F change in just 0.5 seconds to other stationary locked-in-place liners.

 

 

Toshiba_LF516_LF546_Wafer_Data_SheetLF516/LF546 Data Sheet

Toshiba_LF620_LF622_Operation_guideLF516/LF546 Instruction Manual

 

 
 

LF664

Flanged (Large) - LF664

Electromagnetic Flowmeters

The LF664 uses Faraday's Law of Electromagnetic Induction to measure the process flow. The device consists of two units. The first is a detector, through which the fluid to be measured flows and in which low level signals proportional to flow rates are obtained. The second unit is a converter which supplies excitation current to the detector, amplifies the signals from the detector, and processes and converts the signals into the 4-20 mA dc current signal. Model LF664 is available as a remote or integrally mounted unit. It ranges in size from 500 mm - 1,950 mm (20" - 78").
 
  

Toshiba_LF554_LF620_Data_SheetLF664/LF620 Data Sheet

Toshiba_LF620_LF622_IMLF620/LF622 Converter Instruction Manual

Toshiba_LF620_LF622_Operation_guideLF620/LF622 Operation Guide

Toshiba_LF664_IMLF664 Flowtube Instruction Manual

Toshiba_LF620_LF622_IMLF620/LF622 Converter Instruction Manual

Toshiba_LF620_LF622_Operation_guideLF620/LF622 Operation Guide

 

LF150

Flanged (Large) - LF150

Electromagnetic Flowmeters

The LF150 is a large meter-size detector with small and light-weight structure. Coil arrangement allows for uneven flow to be measured correctly. Combined with the separate LF230, which has an improved noise suppression circuit, can provide superior signal processing capabilities. The flowmeter is highly resistant to noise and provides a stable output for fluids containing slurries. The LF150 ranges in size from 2,000 mm - 3,000 mm (80" - 120").

 

 Toshiba_LF150_Data_SheetLF150 Flowmeter Data Sheet

Toshiba_LF232_Data_SheetLF232 Flowmeter Data Sheet

Toshiba_LF150_IMLF150 Flowmeter Instruction Manual

Toshiba_LF232_IMLF232 Converter Instruction Manual

 

      

APPLICATION PHOTOS

Toshiba_LF654_Mount_Anywhere_MagmeterToshiba_LF654_Mount_Anywhere_MagmeterToshiba_LF654_Mount_Anywhere_Magmeter
Toshiba_LF654_Mount_Anywhere_MagmeterToshiba_LF654_Mount_Anywhere_MagmeterToshiba_LF654_Mount_Anywhere_Magmeter
Toshiba_LF654_Mount_Anywhere_MagmeterToshiba_LF654_Mount_Anywhere_MagmeterToshiba_LF654_Mount_Anywhere_Magmeter
Sludge_Thickner_Toshiba_LQ500_LQ300_Density_MeterToshiba_LQ_Series_Density_MeterToshiba_LQ_Density_Meter_Sludge_Basin_ThicknerToshiba_Density_LQ_Sump_Solids_Handling_Facility